flowSEL 1.0.4

last update: May 16^th, 2008

Module Selection Tool

Module selection software for motor drive applications.

With your input of:

·          DC-voltage

·          switching frequency

·          heat sink temperature

·          motor current

·          motor voltage

·          cos-phi

·          motor current 

You will get:

·          a list of modules fulfilling your specification with Tj for IGBT and FRED and the module efficiency.

The highlighted module in the list is shown in a graphic figure for  

·          dynamic motor current

·          dynamic power dissipation

·          dynamic chip temperature

Software Download:

step 01: download and install LabVIEW Runtime Engine 8.2. (32MB) once (web and CD)

step 02: download flowsel_104.exe (340KB) into your simulation directory.

step 03: start flowsel_104.exe

flowSIM 3.0.1

last update: May. 16^th, 2008

Simulation Software for Power Modules

simulation environment for:

·          motor drive

·          generator / UPS

·          PFC

Simulation with measured module parameters!

·       dynamic chip temperature and power dissipation of all module components as: Rectifier, IGBT, FRED, PFC-switch

·       Interactive gate resistor optimizing

Software Download:

step 01: download and install LabVIEW Runtime Engine 8.2. (32MB) once (web and CD)

step 02: download flowsim_301.exe (2.8MB) into your simulation directory.

step 03: download Datas.dat (9.9MB) into your simulation directory (update if new data are available)

step 04: start flowsim_3.exe

Quick Guide for flowSIM: