Application Note / Technical Article |
|
Simulation and Thermal Design: |
|
|
Improved Thermal Interface for Direct Pressed Power Modules |
|
|
FlowSIM – New Innovative Electrical and Thermal Simulation Method for Power Modules in Inverter Applications. |
|
|
Influence of Thermal Cross Coupling at Power Modules (PCIM-Europe 2006) |
|
Motor Integration: |
|
|
Motor Integrated IPM-Solution for Servo Drive Applications (PCIM-China 2006) |
|
Industrial Drives: |
|
|
flow90PIM1 - an innovative Power Module with 90° mounting angle |
|
|
Intelligent Structure of Power Modules - flowPHASE 0 |
|
Module Mechanics and Packaging: |
|
|
Isolation Test of the Temperature Sensor in the P08X, P18X, P48X Modules |
|
|
Mechanic Interaction of Module, PCB and Heat Sink in Power Applications |
|
|
Improved PCB-Layout with Flow Through Power Modules |
|
Fast Switching / Active PFC with Power Modules: |
|
|
Advantages of SiC Schottky Diodes in Fast Switching Power Electronics Solutions |
|
|
Fast Switching Power Module Solutions for Applications with 1200V Component Rating (PCIM-Europe 2006) |
|
|
New Power Module Structure for Efficiency Improvement in Fast Switching Power Applications (>50kHz, >1kW) with 600V Component Rating (PCIM-Europe 2005) |
|
|
Modules as an Instrument for Low Inductive System Designs |
|
|
PFC-Fundamentals: 1. Sinusoidal Current Sourcing from the Public Power Grid 2. Active Power Factor Correction – Principle of Operation |
|
|
Active PFC with Inrush Limitation and Short Circuit Protection |
|
|
2nd Generation of PFC Solutions / High Efficiency PFC |
|
Solar Inverter |
|
|
High Efficient Topologies for Next Generation Solar Inverter |
|
Automotive & Traction |
|
|
Standard Modules Supporting Ultra High Motor Speed for Electric Vehicle (Dec. 2006) |
|
